Past Projects

The following projects are representative of our field engineering, manufacturing, and installation capabilities.

Machine Guarding

Machine guarding for this dial machine was built square to create room for machine service. The guarding is high enough for a person to stand up inside to service the machine.
This machine guarding features triple sliding doors that can slide to either side to allow greater access into the machine.
PVC coated, wire mesh safety guarding is shown around the robot cell. The assembled guarding is mounted on the machine frame.

Shown are three custom consoles with top and bottom doors; monitor viewing windows in the upper doors and a sliding keyboard shelf at standing height.
Extra deep three-door custom electrical enclosure featuring door louvers and overlapping doors. A drip edge is above the doors. The enclosure is painted to customer specifications.
Portable console features a slide out keyboard shelf and a monitor viewing window. The console includes a side door for full access, adjustable inside shelf, document pocket, and lockable front swivel castors.

Hydraulic tank with support stand.
Custom hydraulic tank with no drip pan. The tank has a cut out for a top-mounted pump and welded-in couplings.
Hydraulic tank with drip pan. It has a hinged access door, a pump mount cut out, and various weld-in couplings on top and on the side. The tank includes struts welded on one end to mount controls.

This mist collection duct header branches to each station on a dial machine. The duct header was supplied preassembled and mounted on the machine in the orientation shown.
These welded machine base sections are shown prior to finish machining.
This machine base features clear lexan doors which follow a top and bottom mounted circular track. The vertical supports and overhead assembly enclose the electrical conduit system.

This machine guarding project includes an operator platform along one side, stairway, and overhead balcony.
An operator platform is included as part of the machine guarding for this honing transfer machine. The operator platform runs along one side of the machine.

See more information about Stairways and Mezzanines

This washer housing has an overhead monorail where parts travel thru the washer hanging from a trolley. The upper housing has access doors along both sides. The tank has cleanout doors on the side.
This washer housing encloses a rotary table which holds parts as they rotate thru the wash and blow off stations. It also has interchangeable upper access doors and the clean out doors on the tank.